19
Reset Handset Default setting
z
By choosing ‘Default’ under ‘Handset’, user will be asked to confirm the resetting procedure.
C
O
N
F I R
M ?
z
Once confirmed, all the handset setting parameters will be reset to default values.
Registration
z
To register a handset to a base station, the base has to be ready for registration. The base will be ready
for registration for 2 minute when a page key is pressed and hold for 3 seconds.
z
After selecting ‘REGSTER’, the handset starts searching for a base station that is available for
registration. The ‘Aerial’ icon starts flashing.
S E A R C H I N G
z
If success, the registration procedure will be completed with a confirm tone. If fail, after
60
seconds,
the registration procedure will be exited with an error tone.
Change DTMF/Pulse Dialing
z
The DTMF or pulse dialing mode can be selected by choosing ‘Dial Mode’ from the base setting
menu.
z
After selecting, the current dial mode is shown;
D
T
M F
P
U
L
S
E
z
Press [ /
]
or
[Menu/ ] to select DTMF or pulse dial mode
.
Press [INT / OK] to confirm or press
[C] to abort.
De-registration
z
One of the registered handset is able to remove the registration of another handset.
z
Select ‘DEREG HS’ from the menu, user will be asked to enter the handset number to be deleted
D
E
R
E
G : ?
z
For safety purpose, a handset cannot delete itself. So, the handset number is shown for other handset.
In case that there is only one handset registered, the de-registration procedure will be aborted.
z
Press [INT/OK] to proceed. That handset will no longer be able to access the base. The ‘Aerial’ icon
will disappear and ‘NOT RGSTRD’ will appear as shown.
Содержание 22428
Страница 1: ...0 ...