14
z
After the charging period, the software will stop the fast charge cycle and the battery icon will be
shown as full steadily.
z
An empty battery has to be charged for about 14 hours in order to reach maximum capacity.
Paging function
z
If the page key is pressed on base during standby mode, base will beep once and the handset will
output the paging tone. ‘PAGING’ message will be shown on LCD;
P A G I N G
z
Pressing the page key or any key on handset can stop the page tone and page display.
5 Menu functions
General description
z
The menu can only be accessed when the handset is in standby mode.
z
All individual functions are listed in the form of a menu.
z
Pressing [Menu / ] to enter the menu and the first selectable item can be seen.
z
For example the first selectable item in menu is shown;
1 - C A L L L O G
z
The next item can be chosen by pressing
[ /
]
or [Menu/ ] until the desired item is shown on the
display. User may then press [INT /OK] to confirm the selection.
z
Alternatively, a user may also press an index digit for the desired item to directly select that item.
z
At any stage of menu function, user may like to go one level up by pressing [C] or press and hold [C]
to completely leave the menu.
z
At any stage, user may like to connect to the base immediately by pressing [ ].
z
For the sake of convenience, a list of selectable options will be shown as following, although only
one item will be actually displayed on the LCD.
E N G L I S H
P O R T U G U E S E
S P A N I S H
z
The previous selection will always be shown first and users can change the selection by pressing [ /
]
or [Menu/ ]. Users may like to press [INT /OK] to confirm the selection or cancel the selection
and go back on level up by pressing [C].
z
Handset can exit from menu mode after no key pressing for 20 seconds.
Содержание 22428
Страница 1: ...0 ...