Wall Control Installation
BLACK
RED
RED
BLACK
BLACK
BLACK
GREEN
/BARE
GREEN
/BARE
GREEN
-If your switch box has a ground wire (green or bare copper), connect the green wire from the wall control to
the ground wire removed from the switch. If not , connect the green wire from the wall control directly to one
of the screws from the switch box.
- Connect one black wire from the wall control to the tagged wires removed from the switch.
TAG
TAG
3B
3-WAY APPLICATION
- Connect second black wire from the wall control to the other black wire removed from the switch.
- Cap off the red wire removed from the switch.
If you had taped together two black wires from the switch, connect both wires to the control.
Secure wire nuts to ensure that no bare wire is exposed.
4
5
6
7
8
Secure wall control to the switch box using the screws provided.
Install the 23A 12V battery provided into the compartment.
Secure a decor style wall plate to the wall control using the screws that come with the wall plate.
Attach the panel to the wall control, aligning the holes.
REFER TO DIAGRAM SHOWN BELOW TO COMPLETE INSTALLATION
3
Slide the ON/OFF switch on the wall control to “
ON
” position.
Panel
