Fan Installation
10
NOTE: Do not test fan until
fully assembled. Fan will not
operate without light kit
attached.
WARNING: After making the
electrical connections,
carefully unhook the fan
and hold the fan firmly while
attaching the fan to the
mounting plate.
Remove the motor assembly (O) from the hook of
mounting bracket (N) and push up the motor
assembly (O) until the two screws on mounting
bracket (N) are engaged with L type slot holes on
canopy of the motor assembly (O).
Install the two screws previously removed and
tighten all four screws.
Push the canopy trim ring up until it
locks into place at the top of on the
canopy.
Canopy
Trim Ring
N
O
U
MOUNT FAN BODY
Loosen two (one of each across) of the four screws
(U) from the mounting bracket (N) and remove the
other two.
Rotate the motor assembly (O) slightly until the
two screw heads are in the L type slot holes.
1
2
3
4
5
T
F
S
Assemble fan blade bracket (S) to
fan blades (T).
Attach blades to motor assembly.
G
ATTACH FAN BLADES
1
2
Remove the
corrugated paper
3
motor blocks.