manualshive.com logo in svg

GE Security NetworX Series, Установка и запуск

Поделиться
Скачать
GE Security NetworX Series Скачать руководство пользователя страница 21

 

NX-8V2 Control 

 

21 

L

  

42 

GO TO PROGRAM CODE 

6............. numerical 

Location 42 contains the "Go To Program Code".  This location contains either a 4 or 6-digit code. If the 6-digit code option is enabled 
in Location 41, THIS CODE MUST CONTAIN SIX (6) DIGITS.  If this option is not enabled in location 41, the last 2 segments (digits) 
will be ignored.  With the NX-8V2 disarmed, the "Go To Program Code" can be used to enter the Program Mode. 
 

 

43 

GO TO PROGRAM CODE PARTITION & AUTHORIZATION 

2............. feature select 

The "Go To Program Code" can be used as a standard arm/disarm code.  When using the code to arm or disarm, the user ID is 255. 
(This code may not be changed in the Run Mode.) 
 

Segment 1:

 

 

1 =  Reserved. 
2 =  On enables "Go To Program Code" as an arm only code. 
3 =  On enables "Go To Program Code" as an arm only after closing. 
4 =  On enables "Go To Program Code" as a master arm/disarm code (can change user codes) 
5 =  On enables "Go To Program Code" as an arm/disarm code.  
6 =  On enables "Go To Program Code" to bypass zones. 
7 =  On enables "Go To Program Code" opening and closing reports. 
8 =  Reserved. 

 

Segment 2: 

1 =  On enables the "Go To Program Code" for Partition #1. 
2 =  On enables the "Go To Program Code" for Partition #2. 
3 =  On enables the "Go To Program Code" for Partition #3. 
4 =  On enables the "Go To Program Code" for Partition #4. 
5 =  On enables the "Go To Program Code" for Partition #5. 
6 =  On enables the "Go To Program Code" for Partition #6. 
7 =  On enables the "Go To Program Code" for Partition #7. 
8 =  On enables the "Go To Program Code" for Partition #8. 

 

L

  

44 

DURESS CODE 6............. numerical 

Location 44 contains the "Duress" code.  This Location contains either 4 or 6 digits. If the 6-digit code option is enabled in Location 41, 
THIS CODE MUST CONTAIN SIX (6) DIGITS.  If the 6-digit option is not enabled in location 41, the last 2 digits will be ignored.  

If the 

duress code is programmed, it will work for all partitions. 

 

 

45 

AUXILIARY OUTPUT 1-4 PARTITION SELECTION 

4............. feature select 

Location 45 is used to select which partition(s) the events must occur in before the output will activate.  Location 45 has 4 segments.  
Segment 1 corresponds to output 1, and Segment 4 corresponds to output 4. 
 

Segment 1 (Aux 1) 

Segment 2 (Aux 2) 

Segment 3 (Aux 3) 

Segment 4 (Aux 4) 

1= Partition 1 

1= Partition 1 

1= Partition 1 

1= Partition 1 

2= Partition 2 

2= Partition 2 

2= Partition 2 

2= Partition 2 

3= Partition 3 

3= Partition 3 

3= Partition 3 

3= Partition 3 

4= Partition 4 

4= Partition 4 

4= Partition 4 

4= Partition 4 

5= Partition 5 

5= Partition 5 

5= Partition 5 

5= Partition 5 

6= Partition 6 

6= Partition 6 

6= Partition 6 

6= Partition 6 

7= Partition 7 

7= Partition 7 

7= Partition 7 

7= Partition 7 

8= Partition 8 

8= Partition 8 

8= Partition 8 

8= Partition 8 

 

 

46 

AUXILIARY OUTPUT 1 - 4 SPECIAL TIMING 

4............. feature select 

Location 46 contains special timing feature activation for the four auxiliary outputs.  Segment 1 corresponds to output 1; Segment 4 
corresponds to output 4.  
 

Segments 1 - 4: 

1 =  On if output should be timed in minutes; Off if timed in seconds. 
2 =  On if output should latch; Off if output should be timed. 
3 =  On if output should stop timing upon code entry; Off if the output should continue to time upon code entry. 
4 =  On if output should only activate between the closing and opening time in loc. 52 and 53. 
5 =  On if output should only activate between the opening and closing time in loc. 52 and 53. 
6 =  On if output should be inverted (0 volts going to 12 volts when activated). 
7 =  Reserved. 
8 =  Reserved. 

 

 

47 

AUXILIARY OUTPUT 1, EVENT & TIME 

2............. numerical 

Segment 1: 

 

Use Table XIII-1 to select the event that will activate Auxiliary Output 1. 

Segment 2:

  

Program the timing from 0-255 (minutes or seconds, depending on data programmed in Segment 1, Location 46).  
Programming a "0" makes the output follow the event.  

Содержание NetworX Series





























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды