GE Security NetworkX NX-1300E, Руководство пользователя

Страница: 17 / 24

Page 15
OTHER KEYPAD FUNCTIONS
SETTING THE KEYPAD TONE
Step 1 Press [
r
]-[ 0 ]. Keypad is now in the “Adjust Tone” mode.
Step 2 Pressing the [
•
] key will make the keypad sounder go to higher
tones, pressing the [
–
] key will make the keypad sounder go to
lower tones.
Step 3 When the desired tone is reached, press the [ # ] key to set this tone
and exit from the “Adjust Tone” mode.
CHANGE PARTITION – Optional
Step 1 Press [
r
]-[ 1 ].
Step 2 Press a NUMBER key between 1 and 8 to change partitions
momentarily.
Step 3 If no other key is pressed, it will go back to its standard partition in
ten seconds.
Step 4 If another key is pressed, the system will remain in the new
partition until no keys have been pressed for 60 seconds.
VIEW ALARM MEMORY
Step 1 Press [
r
]-[ 3 ]. The zone(s) that created the last alarm will be
displayed on the keypad.
Step 2 The ALARM MEMORY feature will flash those zones that created
alarms and will light steady those zones that were bypassed during
the last alarm.
TEST FUNCTION – Optional
If programmed, this function will perform a battery test, communicator test,
and/or a siren test. Alarms and reports will not be sent, unless a
communicator test is performed at which time a test signal will be sent.
Step 1 Press [
r
]-[ 4 ]. The test will be performed as programmed.
Step 2 If the siren test is performed, enter a user code to silence the siren.