GE Security GEC-DV-16-FP, Руководство по установке

Страница: 15 / 40

11
2. Carefully remove the protective tape ( Figure 11 ).
Figure 11. Removing protective tape
Protocol and baud rate settings
The camera has two 4-bit DIP switch blocks that determine the protocol and baud rate of the data
communication. Settings are loaded when the camera boots up. Be sure to turn the camera off, change the DIP
switch settings, and then power the camera back up to load the changes.
Note: If you have difficulty accessing the dip switches when the camera is installed, remove the camera shroud.
Figure 12. Camera shroud
Camera shroud