GE Security DIGIA II -, Руководство пользователя

Страница: 24 / 46

Digia II
User Manual
16
Network
The Network submenu has three of its own submenus. They are Network configuration, Network email, and
Network DDNS.
Network configuration
Figure 10 shows the Network configuration submenu.
Figure 10. Network configuration
Table 6. Network configuration submenu
Menu item Description
Data port Default is 00554.
HTTP port Default is 00080.
Control port Default is 01600.
Client access Check this box if you want to enable access to the Digia II over a network.
Bandwidth saving Default is 8192 KB. Select between 10 and 8192 KB. This limits the
bandwidth for the network stream.
Network type Choose between Static and DHCP. DHCP will assign values to the IP,
subnet, gateway, and DNS server values automatically.
IP The IP address of the unit. If you choose static as a network type, you can
set the IP address by highlighting the number you want to change, hit
Enter , and then use the up and down arrow to change the values. Hit
Enter again to set the number, then use the left or right arrows to move to
another position and repeat to change that number.
Subnet mask The subnet mask of the unit. If you choose static as a network type, you
can set the subnet mask the same way as you set the IP address.
Digia II Menu - Network
<< Network Configuration >>
Data Port
HTTP Port
Control Port
Client Access
Bandwidth Saving
Network type
IP Address
Subnet Mask
Gateway
DNS Server
00554
00080
01600
8192
DHCP
000.000.000.000
000.000.000.000
000.000.000.000
168.095.001.001