Concord
12
1. From any touchpad press
7
+
7
+
output number
. If the output was already activated, it will
shut off. If the output was off, it will activate.
Checking the Status of Your System
Checking the system status means finding out about the current condition of your system. This
includes finding out if any sensors are open or currently bypassed, whether or not the AC power
and backup battery are okay, the nature of the most recent alarm, and more, depending on the fea-
tures in use and the equipment in your system.
Check the system status if:
•
Your system sounds trouble beeps (five short beeps every minute).
•
Your touchpads display, “ALARM,”
and
“POLICE,” “AUXILIARY,” or “FIRE.”
•
Your touchpads display, “PRESS STATUS” or a blinking
*
.
If an alarm or system trouble condition has occurred, it is displayed on a touchpad the first time
you perform a Short or Full Status check. Performing a system status check a second time dis-
plays the system status including any trouble conditions.
If any alarm or system trouble is active, it continues to show up in every status check until the
system is disarmed.
Short System Status
A Short Status indicates the current arming level, sensor status (whether open or bypassed), low
battery, supervisory, auxiliary phone, AC power or backup battery failures.
To get a Short System Status:
1. Press
*
. (
*
is labeled
Status
.)
The system sounds beeps according to the current arming level (one for Level 1, two for Level 2,
three for Level 3). Touchpads display and optional voice modules announce the status informa-
tion, for example, “SYSTEM IS OK,” or “SENSOR 02 OPEN.”
Full System Status
A Full Status combines the Short Status information with added details about specific system
features.
To get a Full System Status:
1. Press
* + *
.
Interior sirens sound beeps according to the current arming level. Touchpads display and optional
voice modules announce the status information, for example, “SYSTEM IS OK,” “SENSOR 03
BYPASSED,” “SYSTEM BATTERY IS OK,” “AC POWER IS OK.” If the optional Energy
Saver module is installed the system will display/announce its status (on/off) and the current tem-
perature (if on).
Panic Alarms
Panic alarms are easily activated from any touchpad to quickly alert the central monitoring sta-
tion to a Fire, Police, or Auxiliary emergency. A panic alarm can be sent at any time, regardless
of the current arming level:
1—OFF, 2—STAY, or 3—AWAY.
This system is designed to inform a central monitoring station of the nature of the emergency so
the correct personnel can be dispatched immediately.
Each type of panic alarm sounds and reacts differently when activated.
Type of Alarm
Alarm Sound
Fire
Repeating series of three beeps
Police
Continuous tone
Auxiliary
Rapid beeps
Содержание 60-792-01-95R
Страница 59: ...Concord 51 Floor Plan...
