Masoneilan Model 4411 Electropneumatic Transducer Instruction Manual | 1
© 2015 General Electric Company. All rights reserved.
Safety Information
Important - Please Read Before Installation
These instructions contain
DANGER, WARNING, and CAUTION
labels, where necessary, to alert you to safety related or other
important information� Read the instructions carefully
before
installing and maintaining your control valve�
DANGER and
WARNING hazards are related to personal injury� CAUTION
hazards involve equipment or property damage� Operation
of damaged equipment can, under certain operational
conditions, result in degraded process system performance
that can lead to injury or death� Total compliance with all
DANGER, WARNING, and CAUTION notices is required for
safe operation�
This is the safety alert symbol� It alerts you to potential
personal injury hazards� Obey all safety messages that
follow this symbol to avoid possible injury or death�
Indicates a potentially hazardous situation which, if not avoided,
could result in death or serious injury�
Indicates a potentially hazardous situation which, if not avoided,
could result in serious injury�
Indicates a potentially hazardous situation which, if not avoided,
could result in minor or moderate injury�
When used without the safety alert symbol indicates a
potentially hazardous situation which, if not avoided, could
result in property damage�
Note: Indicates important facts and conditions�
Warranty
Items sold by General Electric are warranted to be free from
defects in materials and workmanship for a period of one
year from the date of shipment provided said items are used
according to GE recommended usages� GE reserves the right
to discontinue manufacture of any product or change product
materials, design or specifications without notice�
This instruction manual applies to the Masoneilan 4411 IP
Transducer�
Note:
• The 4411 IP Transducer MUST BE installed, put
into service and maintained by qualified and
competent professionals who have undergone
suitable training�
• Under certain operating conditions, the use of damaged
equipment could cause a degradation of the performance
of the system which may lead to personal injury or death�
• Changes to specifications, structure, and components used
may not lead to the revision of this manual unless such
changes affect the function and performance of the product�
• All surrounding pipe lines must be thoroughly flushed to ensure
all entrained debris has been removed from the system�
IMPORTANT: SAFETY WARNING
Please read these instructions carefully BEFORE this instrument
is installed or maintained�
These converters are intended for use in industrial
compressed air systems only� Ensure that adequate pressure
relief provision is installed if application of system supply
pressure could cause downstream equipment to malfunction�
Installation should be in accordance with local and national
compressed air and instrumentation codes�
Products certified for use in explosion-proof or intrinsically
safe installations
MUST:
a) Be installed in accordance with local and national codes
for hazardous area installations, and in accordance
with this manual�
b) Only be used in situations which comply with the
certification conditions stated in this handbook�
c) Only be maintained by qualified personnel with adequate
training on hazardous area implementation�
Before using these products with fluids other than air or for non-
industrial applications consult GE�
About this Manual
• The information in this manual is subject to change without
prior notice�
• The information contained in this manual, in whole or part,
shall not be transcribed or copied without Masoneilan’s
written permission�
• Please report any errors or questions about the information
in this manual to your local supplier�
• These instructions are written specifically for the 4411 IP
Transducer, and do not apply for other instruments or IP
transducers outside of this product line�
