GE Medical Systems T-2100, Руководство оператора

Страница: 24 / 28

3-2 T-2100 Treadmill 2021403-026B
Maintenance
Introduction
Recommended Maintenance
Refer to the T-2100 Treadmill Service Manual shipped with your system
for detailed maintenance information.
NOTE
Unless you have an Equipment Maintenance Contract, GE Medical
Systems
Information Technologies does not in any manner assume
the responsibility for performing the recommended maintenance
procedures. The sole responsibility rests with the individual or
institution using the equipment. GE Medical Systems
Information
Technologies service personnel may, at their discretion, follow the
procedures provided in this manual as a guide during visits to the
equipment site.
Inspection and Cleaning
Visual Inspection
Perform a visual inspection daily. Turn off the unit and remove power
before making an inspection or cleaning the unit. If you notice any items
that need repair, contact an authorized service person to make the
repairs.
Inspect the following for excessive wear or damage:
„
Walking belt
„
Drive belt
„
Handrail and hardware
„
All cords and cables for fraying or other damage.
„
Verify that all cords and connectors are securely seated.
Exterior Cleaning
Turn the treadmill system off. Clean the exterior surfaces with a clean,
soft cloth and a mild dishwashing detergent diluted in water. Wring out
the excess water from the cloth and take care not to drip solutions on the
keyboard or writer assembly. (Use anti-septic cleaner on the handrails
and walking belt.) Avoid contact with open vents, plugs or connectors.
Dry the surfaces with a clean cloth or paper towel.
Disposal of the Product
The product described in this operator manual must not be disposed of as unsorted
municipal waste and must be collected separately. Please contact an authorized
representative of the manufacturer for information concerning the decommissioning of your
equipment.