GE Medical Systems T-2100, Руководство оператора

Страница: 20 / 28

2-4 T-2100 Treadmill 2021403-026B
T-2100 Treadmill Overview
Systems Information Technologies and open a customer-billable service
call.
Before using the treadmill, have qualified personnel perform the tests
listed below.
„
AC line voltage test to verify the power outlet is properly wired.
„
Ground continuity test to verify all exposed metal is properly
grounded.
„
Leakage tests to verify the equipment passes all applicable leakage
tests.
Your in-house biomedical technician, electrician, or technically qualified
personnel can find instructions for performing these tests in the T-2100
Treadmill Service Manual shipped with your system.
Calibrating Treadmill
It is recommended that the treadmill be calibrated each time it is moved.
Refer to the steps below to activate the T-2100 Treadmill self-calibration
feature:
1. Connect the AC power cable on the treadmill to the wall outlet.
WARNING
POWER CABLES — Route the AC Power cable away
from moving parts.
An AC power cable caught in moving parts could cause
injury to the user and equipment.
2. Turn the power switch on the treadmill to On.
3. Remove controlling device cable or turn off the controlling device.
WARNING
During calibration, the treadmill will move and reach
maximum elevation. Injury may result.
Make sure you monitor the site at all times.
Make sure there are no customers or patients near the
treadmill during calibration.