1
2
Loosen screws to remove endcap.
Option: power input from top – Remove knockout
in top and A) install 1/2” conduit, or B) install AC
power cord with strain relief.
Surface Mounting
2
3
4
1
Loosen screws on side of fixture and unhinge LED
lightbar from fixture.
Run power through one of the 0.875” holes in
top of fixture and into a junction box. Connect
AC wires from junction box to fixture wires (see
Step 4 under Electrical Connections for details).
Reattach lightbar to fixture and tighten screws.
Position the two mounting brackets at the ends of
the fixture and tighten. Attach the fixture to ceiling
using appropriate hardware (not supplied).
Ceiling
Fixture wires
Junction box
Junction box
AC line
Open LED lightbar
Move mounting
brackets to ends
Loosen screws
Electrical Connections
Note:
Please see additional wiring instructions if installing multiple fixtures in a Continuous Run.
A) Conduit
B) Power cord
