GE Interlogix Digital Video Multiplexer Recorder Скачать руководство пользователя страница 55

Страница: 55 / 75

0150-0229D

Kalatel DVMRe StoreSafe

Alarms

4.1 Alarm Input

Alarm devices are connected via the Alarm PCB on the back panel of the unit (see section 1.7). Each
Alarm Input corresponds with the Camera Input of the same number.

4.2 Alarm Output

Front Panel Alarm LED:

The LED located to the left and above the Alarm button is lit for the duration

of the alarm.

Internal Buzzer:

The internal buzzer is activated until it is Silenced and Acknowledged. This feature

can be turned off in the menu system (see Buzzer Setup in section 3.10).

Monitor Displays:

Discussed below in the

On-screen Displays During Alarms

section.

Output Relays:

The alarm output relay is active for the duration of the alarm.

Macro Activation:

Unit can be configured in the menu system to activate a macro when an alarm is

detected (see Link to Macro in section 3.10).

Record Rate:

Record Rate can be increased by recording at the Alarm Record Rate (see section

3.10) and by Interleaved or Exclusive Recording (see Alarm Record mode in section 3.10).

4.3 Alarm Acknowledge

Pressing the

Alarm

button acknowledges to the unit that the alarm has been

recognized and silences the internal buzzer. This does not clear the alarm
condition.

Alarm Button

4.4 On-screen Displays During Alarms

Monitor-A and Monitor-B Display During Alarm

Single Alarm:

Unit switches to a full screen display of the camera in alarm.

Additional Alarms:

Unit switches to a sequenced display of all cameras in alarm.

4.5 Alarm Operations During Playback

Live Alarms Displays

Single Alarm:

Unit switches to a full screen display of the camera in alarm on Monitor B.

Additional Alarms:

Unit switches to a sequenced display of all cameras in alarm on Monitor B.

Содержание Digital Video Multiplexer Recorder












































































Результаты поиска

Содержание Digital Video Multiplexer Recorder

Отзывы:

Похожие инструкции для Digital Video Multiplexer Recorder

Бренды по названию

Популярные бренды

GE Interlogix Digital Video Multiplexer Recorder, Руководство пользователя

Результаты поиска

Содержание Digital Video Multiplexer Recorder

Отзывы:

Похожие инструкции для Digital Video Multiplexer Recorder

Бренды по названию

Популярные бренды