GE Interlogix CareGard 60-883-95R Скачать руководство пользователя страница 25

Страница: 25 / 34

Adding/Replacing Sensors

Home and Away

If you will be away from home or unable to acknowledge medication reminders it’s necessary to

temporarily turn them off.

When you’re Away from home:

Press the Power/Home/Away button. The system announces “Medication Reminder Off”. If

the Activity Check is scheduled it will be turned off as well. The Power/Home/Away button

will blink when Medication Reminders are off.

When you return Home:

Press the Power/Home/Away button. The system announces “Medication Reminder On.” If

the Activity Check is scheduled it will be turned on as well.

Adding/

Replacing

Sensors

CareGard allows up to 24 sensors to be learned into the system. There are two methods for add-

ing a sensor to the system. The first method uses the menu button on the back of the panel, the

second uses the programming buttons.

Supervised vs. Not Supervised

Most sensors supported by CareGard can be programmed to be supervised or not supervised. The

panel monitors supervised sensors and sounds trouble beeps or turns the Status light on when

there is a problem with the sensor.
In most situations sensors should be left in the Supervised state. Portable panic sensors should be

Not Supervised.

To Add or Replace a Sensor using the Menu Button on the back of

the Panel

Note

Pressing the Menu button cycles through 5 functions; Phone Test, Sensor Test, Medication Reminder,

Add Sensors and Delete all Sensors. The panel will announce the current function each time the button

is pressed.

Important !

It is necessary to move quickly between the steps when adding sensors. Read these steps carefully

before attempting to add a sensor. You may have as little as 5 seconds to move between steps.

The following table describes how to program each type of sensor. For complete programming

and mounting instructions see the

Installation Instructions

for the device.

Table 7: Programming Sensors

Sensor Type

To Program

Personal Help Button

Pendant Help Button

1. Repeatedly press the Menu button on the back of the panel until the panel announces “Add

sensor. Press Status to select.”

2. Press the Status button on the front of the panel.
3. Press the button on the sensor.
4. Repeatedly press the Power/Home/Away button until you hear the sensor type you want.

Personal Help Button type possibilities:

Emergency Sensor type not supervised

Emergency Sensor type supervised

5. Press the Status button to accept the sensor.

The system will announce the sensor name, type and number.

Содержание CareGard 60-883-95R



































Результаты поиска

Содержание CareGard 60-883-95R

Отзывы:

Похожие инструкции для CareGard 60-883-95R

Бренды по названию

Популярные бренды

GE Interlogix CareGard 60-883-95R, Руководство по установке

Результаты поиска

Содержание CareGard 60-883-95R

Отзывы:

Похожие инструкции для CareGard 60-883-95R

Бренды по названию

Популярные бренды