GE HEALTHCARE MAC 5500, Руководство оператора

Страница: 30 / 188

System Overview
Name
Description
3 Recovery
Advances the exercise test to the recovery phase or
to the next stage within the current recovery phase.
4
Test end Ends the test and starts the test end phase.
5
Speed W Adjusts the belt speed on treadmills or load on
ergometers. Press
Speed W — to decrease the speed
or load. Press Speed W + to increase the speed or
load.
6
Grade Adjusts the grade of the treadmill. Press Grade á á á to
increase the grade. press Grade
â â â
to decrease the
grade.
7
Start/STOP tmill Starts or stops the treadmill during the test. Press
Start tmill to manually start the treadmill. Press
STOP tmill to manually stop the treadmill.
NOTE:
In the event of an emergency, press and hold the
STOP tmill key to stop the treadmill quickly.
8
Recall Prints a 10–second delayed recall report.
9
12 ld Prints a 12–lead report with 10 seconds of acquired
data.
10
Medians Prints a medians report.
11 Comment Allows you to enter comments about the test.
Comments are printed on many of the final reports.
12 Enter BP
Allows you to enter blood pressure readings or to
trigger a reading from an external device.
Acquisition Equipment
This section provides an overview of the external equipment connected to the MAC
system for the acquisition of ECG data. Familiarize yourself with these components
before attempting to acquire ECG data.
Acquisition Module
WARNING:
BURN PROTECTION — Use of acquisition modules other than the CAM-14 or CAM
HD acquisition modules could result in high-frequency burns.
To ensure defibrillation protection and protection against serious injury, use only
the CAM-14 or CAM HD acquisition modules with this equipment.
30
MAC ® 5500/MAC ® 5500 HD
2046275-016B