GE Druck PV 411A, Руководство пользователя

Страница: 7 / 14

GE Druck PV 411A User Manual
3 K258 Issue No. 3
Connecting the Pump
Connections can be made to the pump either directly or using the range of
adaptors supplied in the optional test kit.
Direct
The ports can be fitted with any suitable length ¼ BSP male connector,
sealing either with an o-ring at the bottom of the port or a bonded seal at the
top. Fit a suitable blanking plug to an unused port.
Swivel Adaptors (optional)
The single, ¼ BSP, swivel adaptor connects with a range of fixed adaptors.
Using the knurled grip-feature, hand-tighten (clockwise) the swivel adaptor,
until it is fully inserted.
Swivel pump head
The pump head swivels through 140° providing optimum viewing angle and
bench-top operation. Placing the pump on the bench allows greater force to
be applied to the scissor-action handles. Internal stops prevent further
rotation of the pump head.
Note: Do not use excessive force when rotating the pump head.
Selector Valve
Pressure
Turn the selector valve fully clockwise (in) position.
Vacuum
Turn the selector valve fully anti-clockwise (out) position.
Vent
Slowly turn the selector valve to the centre position.
C
AUTION
:
A
VOID DAMAGING THE INSTRUMENT UNDER TEST BY USING THE
VOLUME ADJUSTER TO SLOWLY RELEASE HYDRAULIC PRESSURE
.
Scissor-action Handles Limit Adjuster
Turning the limit adjuster (4) clockwise reduces the stroke of the scissor-
action handles (5), turning the limit adjuster (4) anti-clockwise increases the
stroke.
For maximum pneumatic pressure generation, turn the limit adjuster fully
anti-clockwise.