– 20 –
Water Valve
The water valve consists of a valve body and 3
solenoid coils. It is only available as a complete
assembly. Each solenoid controls a speci
fi
c water
function.
Each coil on the water valve assembly has an
•
approximate resistance value of 1.2K
Ω
.
The water valves receive power from the PCB.
•
When energized, there should be approximately
•
120 VAC at the appropriate coil.
3. Disconnect the 3 wire harnesses from the valve.
V
ALVE
C
OVER
4. Lift the water valve straight up and remove the
valve from the top cover.
The water valve is located at the rear center of the
top cover.
To remove the water valve:
Remove the back cover. (See
1.
Back Cover
.)
Remove the 3 Phillips-head screws and lift the
2.
valve cover from the valve.
CN6
CN6
CN6
CN3
Rinse Water
Hot Water
Cool Water
