GDZX ZXPD-200L Скачать руководство пользователя страница 17 | Manualshive

Страница: 17 / 25

GDZX ZXPD-200L Скачать руководство пользователя страница 17

17

displays the collected signals in real time, and the lower part is the PRPD phase

map. With time, the PRPD map will continuously redraw the relationship

between the discharge signal and the phase. According to the relationship

between the phase and the discharge amplitude, it is analyzed whether the

discharge characteristics of the current device have the correlation between 50

Hz and 100 Hz, and the repeatability of the discharge signal in the phase

interval.

Time domain signal waveform

PRPD map

PRPS map

The PRPS map is a three-dimensional map related to the discharge amplitude,

phase and time. It can fully reflect the one-to-one correspondence between the

three, and it can more vividly reflect the characteristics of the current device

discharge. Combining the PRPD map can be more convenient. Analyze the

current discharge type.

Under the default test interface, pressing the icon "" will restart the spectrum

data statistics, after the completion of the set number of cycles (can be set in the

setting interface) after data sampling, the PRPS spectrum is automatically

formed and the PRPD and PRPS spectrum display is automatically popped up

interface

«
...
15
16
17
18
19
...
»

Содержание ZXPD-200L


























Отзывы:

Нет отзывов