20 | 45
Select the same type of propeller in accordance to the letter on the motor during the installation of the
propeller. Set the propeller surface printed with the letter upwards, and screw in the propeller spacer pin on
motor. Then, press the propeller blade in the clamp slot of the motor axis in a vertical direction to the spacer pin
connection. Rotate the propeller blade by 90 degrees so as to align the spacer pin with hole sites at both ends
and then press hard. Finally, screw the propeller cap according to the direction indicated on the propeller cap.
When disassembling the propeller, remove the propeller cap first according to the direction indicated on
the propeller cap. Then lift the propeller blade slightly upwards, and remove it after rotating by 90 degrees.
Finally, remove the propeller.
Anti-Ejection Propeller Design
The anti-ejection design mechanism of the propeller is the second safety guarantee besides the self-locking
design of the propeller cap. Even if the propeller cap falls off, the anti-ejection mechanism of the propeller
can also prevent the propeller blade from falling. The clamp slot on the propeller blade works with the
clamp slot on the motor axis. Only when the blade rotates to a certain specific angle can it be removed
from the motor axis.
Intelligent Battery
The capacity of the GDU SAGA
intelligent battery is 12000 mAh, with a flight duration of 35min
.
Turning On/Off the Power Supply
Short press the power switch and then hold it down for 2s to start up the power supply of aircraft; repeat the
operation to turn off the power supply of aircraft.