3
Step 1
The very first thing you want to do is go to our website www.gdpproducts.com and down-
load the MyCalibrator software to your computer. You will find it under: Program-
mers<GDP MC<Download Software. Once this has been done, plug the device into your
computer using the supplied USB Cable. After powering up, click the “Update” button to
the top right to check for the latest version of the software. Newer versions will contain
support for newer vehicles that may not be represented on previous software versions.
It will either let you know you are already on the latest version, or you will be prompted to
follow a few quick steps to update the software. (insert image #0154)
Step 2
Now bring the device out to your vehicle and plug the OBDII cable into the back of the
device, and then plug that same cable into your vehicle’s OBDII port. Turn the ignition on,
to the run position, do NOT start the vehicle.
Notice:
Make sure that your battery has a good charge and won't fall below 12 volts. If you are
unsure, then to be safe you should hook up to a battery tender for the duration of ALL
file reads and installs. In addition, you should make sure to disconnect/unplug any
electronic devices from any power sources, ports, etc, and turn radio, auto lights, a/c,
etc. off as well. Lastly, make sure to not open the vehicle doors during install or
reads, as that can draw power as well.
