GDC SX-3000, Руководство пользователя

Страница: 32 / 151

SX-3000 Standalone
Integrated Media Block™ User Manual
- 32 -
February 14, 2013
2. SMS
2.3.5.3. Understanding the SNMP Configuration Interface
2.3.5.3.1. General
Figure 15 SNMP Configuration [General Settings].
1 For SNMP Manager IP Address , indicate the IP address of the SNMP Manager where traps are to be
sent by typing in the IP Address , press the + or - button to insert multiple SNMP addresses.
2 For Trap Sending Interval , indicate the time interval in seconds after which a trap should be resent to
the SNMP Manager. The trap will continue to be resent only as long as the error condition exists.
3 For System UpTime Threshold (days) , indicate the threshold time in days.
NOTE: When Trap is On, a trap will be sent if the System UpTime exceeds the threshold value.
4 Activate the Trap by checking the small box opposite SNMP Agent Start .
NOTE: When Trap is On, a trap is sent if the SNMP Agent is started.
Deactivate the Trap by un-checking the small box next to SNMP Agent Start
.
5
Activate the Trap by checking the small box opposite SNMP Agent Stop .
NOTE: When Trap is On, a trap is sent if the SNMP Agent is stopped.
Deactivate the Trap by un-checking the small box next to SNMP Agent Stop.
6 Check on the small box to enable SNMP Service.
1
6
2
3
4
5
0