4. CONTENT MANAGER
1
Automation labels and projector commands can now be executed from an interface on the
Control Panel. Press
Automation
on the
Control Panel
to start the manual automation interface
as shown in
Figure 17
.
2
A new window opens as seen in
Figure 18
. Select an automation label to view the actions
associated with the label. Press
Execute
to execute the automation label.
3
When a projector is configured for automation, projector primitives and macros can be triggered
from this interface as well. Select the projector primitive or macro to be executed, and click the
Send Projector Primitive
or
Send Projector Macro
to send the command to the projector.
Please refer to the GDC Installation Manual
for instructions on how to configure automation
labels, actions and devices.
4. Content Manager
4.1. About the Content Manager
4.1.1. Introduction
The SX-2000/SX-2001 Content Manager allows the user to manage the contents of the server to:
1
Download content from a disk or source on the network.
2
Download keys [KDM
‟s] required for playing back content from disk or source on the network.
3
Delete content that exists on the server.
4
Check that the content that is already on the server is fine and the files are complete and
proper.
4.1.2. Accessing the Content Manager
Figure 19 SX-2000/SX2001 Front Panel.
2
1
