- 33 -
March 15, 2018
Installation Manual for SR-1000 Standalone
Integrated Media Block™
13. AUTOMATION SETUP
12.3. Automation setup for eCNA devices
The SR-1000 supports the eCNA-10 automation system. Follow the steps below to configure an
eCNA device in the server automation interface.
1. Under the
Automation
tab in the menu, click the
Device
subtab.
2. On the left column, click
create.
3. Select
eCNA_IO
as the
device type
. Enter the
name
of the eCNA device, and click
OK
.
4. Enter the
IP address
of the eCNA device.
5. The eCNA device has many cues available for automation. These cues can be enabled
or disabled by selecting them after clicking the buttons in
Server events, eCNA
controls, eCNA status, and eCNA event report
. All cues are disabled by default.
6. Click
Save
to save the settings.
Figure 38 eCNA device setting
