- 26 -
March 15, 2018
Installation Manual for SR-1000 Standalone
Integrated Media Block™
10. CONTENT INGEST MANAGEMENT SETUP
9.
CONTENT INGEST MANAGEMENT SETUP
An ingest source must be configured before content can be transferred to the SR-1000. This
section shows the configuration for content ingest from two different source types. The same
steps can be used to set up content ingest sources using other sources.
9.1. Content ingest from USB disk
The following steps describe the content ingestion from an external USB hard drive:
1. Under the
Content
tab in the menu, click the
Source
subtab.
2. On the left column, select
USB Drive
.
3. Click
Open
to choose content to be ingested from the USB disk.
Figure 28 Content source setting
