HFR UPGRADE MANUAL
FOR SX-2001/SA-2100(A/T) TO SX-000(A/T)R
DIGITAL CINEMA SERVER WITH
INTEGRATED MEDIA BLOCK
4
May 18, 2016
Thank you for purchasing a GDC Digital Cinema Server SX-2000(A/T)R with
Integrated Media Block from GDC Technology Limited.
To upgrade for SX-2001/SA-2100 to SX-2000(A/T)R server with Integrated Media Block,
please review this Upgrade Manual.
COPYRIGHT NOTICE
Copyright © 2016 by GDC Technology Limited
All rights reserved. No part of this manual may be copied or distributed, transmitted, transcribed, stored in a retrieval
system, or translated into any human or computer language, in a form or by any means, electronic, mechanical,
photocopying, recording, magnetic, optical, manual or otherwise, or disclosed to third parties without prior written
permission of GDC Technology Limited.
MANUAL DISCLAIMER
This manual is made with SMS version 9.0 and there might be slight differences depending on the software version
the server is running. The contents, features and specifications stated in this manual are subject to change without
notice due to continuous product development and improvements. In no other event shall GDC Technology Limited
be liable for any loss of profit or any other commercial damages, including but not limited to special, consequential, or
other damages.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
SOFTWARE LICENSE & SOFTWARE MANUAL AGREEMENT
1.
This is an agreement between “GDC Technology Ltd, (“Licensor”) and user (“Licensee”), who is being licensed to
use the upgrade software referred to herein (“Software”) and software upgrade manual (“Manual”).
2. Licensee acknowledges that this is only a limited nonexclusive license. Licensor is and remains the owner of all
titles, rights, and interests in the Software and Manual.
3. This License permits Licensee to install the Software on GDC genuine digital cinema servers that are either
owned by the Licensee or maintained by the Licensee under a service contract with the server owner. Licensee
will not make copies of the Software or Manual, nor allow copies of the Software or Manual to be made by others,
without the prior written consent of Licensor. Licensee may make copies of the Software and Manual for the
purpose of assisting the upgrade process itself, however all such copies should be destroyed at the end of the
upgrade process.
4. THE SOFTWARE AND MANUAL ARE EACH PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. LICENSOR MAKES NO
REPRESENTATIONS AS TO PERFORMANCE, ACCURACY, COMPLETENESS, CORRECTNESS,
SUITABILITY OR VALIDITY OF THE SOFTWARE AND INFORMATION CONTAINED IN THE SOFTWARE
UPGRADE MANUAL. IN NO EVENT SHALL LICENSOR BE LIABLE FOR ANY CLAIM, DAMAGES OR
OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
SOFTWARE OR SOFTWARE UPGRADE MANUAL.THE ABOVE-STATED LIMITED WARRANTY.
