- 15 -
February 21
st
, 2023
USER MANUAL FOR AIB-2000 IO (INPUT-OUTPUT) BOX
9. AIB-2000 CONNECTIONS
9.5 Rear Panel
The rear panel houses 7.1 output Phoenix connections, AES3 RJ-45 connector, Ethernet RJ-45
connector, LCR mon, H/I, V/I outputs, 7.1. input RCA connectors and two RCA NON-SYNC connectors,
as shown in
Figure 5: Rear Panel of AIB-2000
7.1 Output
Eight 3 pin Phoenix connectors provide analog output for connection to analog amplifiers. Source
of the 7.1. output is selected by
SELECTOR
buttons on the front.
AES3 Input
AES3
RJ-45 connector receives the AES3 stream which can be routed to 7.1. output by selecting
the
AES3
button on the front. Refer to
Section 5
for the correct wiring of the AES3 RJ-45 socket.
ETH Input
Ethernet RJ-45 connector provides IP connection. It can be used to access built-in web-interface
to set up the AIB-2000 or receive the control automation signals from the media server. Refer to
Section 4
for the correct wiring of the Ethernet RJ-45 socket.
LCR mon
LCR mon provides monitoring output which is received from the AES3 stream. Please note that
the LCR mon output provides a L+C+R summation of the AES3 inputs to the AIB-2000.
H/I and V/I
H/I and V/I outputs are extracted from AES3 stream and provides for cinema-goers with hearing
and vision difficulties.
NOTE:
The H/I and V/I outputs are derived from AES3 Channels 7 & 8. Please use the H/I and V/I
AES3 outputs from the SR-
1000 when using the ‘GDC Channel Assignment Preset Output
Routing’. Please r
efer to the
‘
GDC SR-1000 User Manual
’
for more details.
