GD Saber PanelMount NVIS 10, Руководство пользователя

Страница: 14 / 25

Saber PanelMount NVIS 90-3104-005 User’s Manual
Page 14
10 Serial Port
10.4 Serial Command Set
The following table describes the proposed command set using only standard ASCII
characters (0x20 – 0x7F) accessible on a standard PC keyboard. All commands shall be
terminated with a Carriage Return <CR> (0x0D) and Line Feed <LF> (0x0A).
COMMAND DESCRIPTION
‘B’
’+’
‘-‘
“XXX”
‘?’
Backlight Brightness Control

Increment Backlight Brightness

Decrement Backlight Brightness
 Set Backlight Brightness Level = “XXX”
 Query Backlight Brightness
‘K’
’+’
‘-‘
“XXX”
‘?’
Keypad Brightness Control

Increment Backlight Brightness [1]

Decrement Backlight Brightness [1]
 Set Backlight Brightness Level = “XXX” [1]
 Query Backlight Brightness
‘M’
’D’
‘N‘
‘?’
Backlight Mode Control

Set Day Mode

Set NVIS Mode [2]
 Query Backlight Mode
‘S’
‘0’
‘1’
‘?’
Backlight/Keypad Brightness Sync

Separate Brightness control

Keypad brightness follows backlight brightness (DEFAULT)
 Query Backlight Mode
‘V’
‘M’
‘+’
‘-‘
‘U’ or ‘u’
‘D’ or ‘d’
Video Controller Command
 Display OSD Menu / Navigate OSD Back

Increment Contrast/ Navigate OSD Right

Decrement Contrast/ Navigate OSD Left
 Increment White Level / Navigate OSD Up
 Decrement White Level / Navigate OSD Down
‘P’
’0’
‘1‘
‘?’
Power

Off

On
 Query Power Status
‘PRGM’ Sets video controller into programming mode
‘E’
‘0’
‘1’
Serial Echo Control

Serial Command Echo Disabled
 Serial Command Echo Enabled (DEFAULT)
‘T’
“XXX”
‘?’
Keypad Timing Control
 Set Keypad Serial Repeat Rate= “XXX” [3]

Query Keypad Serial Repeat Rate
1 Command valid only if Keypad Brightness Sync is DISABLED.
2 Command valid only if NVIS hardware present.
3 Time between repeats shall be defined as XXX * 8 ms