GD RemoteAccess-CPU Series, Руководство по установке

Страница: 41 / 52

»RemoteAccess-CPU-Fiber« target module
RemoteAccess-CPU series · 13
English
Connection to a matrix switch
Trans.|Tx: Plug in the LC connector of a compatible optical fiber. Connect the other
end of the cable to the Rx interface of a dynamic port of the matrix switch.
Trans.|Rx: Plug in the LC connector of a compatible optical fiber. Connect the other
end of the cable to the Tx interface of a dynamic port of the matrix switch.
Power supply
Power In: Plug the connection cable of the power pack into this interface.

Connect the power cable with the power pack and a power socket.
IMPORTANT:
The devices use components with laser technology complying with
laser class 1.
They meet the requirements according to EN 60825-1:2014 as well as U.S. CFR 1040.10

and 1040.11 .
Please observe the following safety instructions:
 Avoid direct eye exposure to beam on page 4
 Always connect optical connections or cover them with protection caps on page 4
 Only use G&D certified transmission modules on page 4
NOTE: For the cable connections, use fiber optic cables with LC connectors. These
cables are available as accessories.
Power In Service
Power
Trans.
Link Status