GD RemoteAccess-CPU Series, Руководство по установке

Страница: 40 / 52

»RemoteAccess-CPU-Fiber« target module
12 · RemoteAccess-CPU series
Installation
Connecting a target computer
Network:
Plug in a category 5e (or higher) twisted-pair cable.
Connect the other end of the cable with the network (Gigabit Ethernet).
NOTE: Place the target module only upright (see sketch below) or at a 90° angle to
the left or right.
NOTE: The fan draws the outside air into the device
at the front
. Warm air is emitted
at the rear
ventilation openings.
IMPORTANT: Make sure that all virtual machines can be accessed via this inter-
face.
Network