GD AQUALINE 1200, Руководство по установке, Страница: 24 / 32

Installation
24
T-EA-5100-1-GB-07-08
The distance of 5 ... 8 mm between the Vee belt pul-
leys and the end cover must be maintained (see Fig.
4.9)
Installing the Vee belt pulley with taper lock
1. Clean and degrease all blank faces. Place the pul-
ley and the bush one in the other. Bring holes in
alignment with each other and install screws
loosely.
2. Push the pulley with the bush on the shaft, align and
uniformly tighten the screws.
Removal
1. Take out the screws, install one as a forcing screw
in the half-thread hole in the bush and tighten. This
slackens the taper lock bush.
2. Remove the slack pulley assembly by hand; do not
apply blows or damage the machine.
Fig. 4.9
Distance between first Vee belt pulley and housing
Fig. 4.10 Installing the Vee belt pulleys
5 - 8 mm
1
2
Fig. 4.11 Removing the Vee belt pulley
Fig. 4.12 Taking off the Vee belt pulleys
1
2