DU-KP-0002-61 Rev D 3/23/06 GCX Corp. Page 3 of 4
Mounting CPU
1. Loosen two Clamping Screws on CPU Clamp. Slide CPU into
Clamp as shown and tighten Screws until CPU is securely
mounted.
Installation Note:
The CPU Clamp accepts housings from 3 to
4.5'' wide, weighing up to 25 pounds.
Mounting Keyboard and Mouse
1. Route keyboard and mouse cables through Cable Retainers under the Keyboard Tray (below left).
2. Pull-out Mouse Trays are provided on each side of Keyboard Tray for left or right-hand mouse use (below right). An
adjustable Nylon screw is located on bottom of each Mouse Tray for locking Tray in position.
Note
: It may be
necessary to loosen the screw on the bottom of the Mouse Tray before initial use.
3. A mouse cradle is provided for storing mouse when not in use. Typical location shown below right.
Clamping Screws (2)
Cable Retainers (2)
Nylon Screws (2)
Mouse Trays (2)
Mouse Cradle
