PAGE 20
BCLO/BTLO Setting
BCLO(Busy Channel Lock-Out) is to disable transmitting
while RX signal is received� Once the channel is busy and
you press PTT, the radio will beep as warning and back to
receiving�
BTLO(Busy Tone Lock-Out)is mainly for repeater a
pplication� It will not be transmitted until receiving RX carrier
with correct sub tone� If the repeater is occupied by other group when
you press PTT button, BTLO will stand-by till the using group is leaving�
1� Press
key till the LCD display appears “FUN” on the up-left cor-
ner� Then press
key to enter the menu mode�
2� Press
till “BUSY” appears on LCD display under menu
010�
3� Rotate the Channel Selection Knob to choose a setting:
BCL: is to disable the transmission when RX signal is received
BTL: is to disable the transmission when RX signal but not matching
CTCSS/DCS tone is received�
OFF: disable this function
4� Press
key to confirm and exit�
Optional Function ON/OFF
Optional Function is working similarly with CTCS/DCS�
Through Optional can activate ANI, PTT ID, Group Call,
Kill and wake up�
1� Press
key till the LCD display appears “FUN” on the up-left cor-
ner� Then press
key to enter the menu mode�
2� Press
till “OPT” appears on LCD display under menu
011�
3� Rotate the Channel Selection Knob to choose a setting:
ON : eable to choose the optional�
