PAGE 7
Basic Operation
Turn the radio ON & OFF
1) Rotate the PWR/VOL knob clockwise till the radio is turned on� The
radio gets started to auto test for two seconds� During auto testing, all
icons will appear on LCD�
2) After auto testing is done, LCD will show channel number and what
functions have been activated by your dealer�
3) Rotate the PWR/VOL knob clockwise to increase its volume or counter
clockwise to reduce its volume�
4) To turn the radio off, rotate the PWR/VOL knob counter clockwise
until the end click�
Monitor
Press the “MON” button on the side of the radio to open the squelch�
This allows you to override the squelch and the CTCSS or DCS tones� It is
useful to monitor the channel before you transmit and ensure there is no
one using the channel when you have CTCSS or DCS tones programmed�
Transmitting
Before transmitting, you can monitor the channel you are using to
ensure it is not busy� Keep pressing “PTT” button and start talking at ap-
proximately 2 inches from the MIC jack� During transmitting, the LED on
the top of the radio will glow red� Release “PTT” button when you have
finished talking�
