15
Assigning a Door Address on Wireless Network
Step Description
1 On the Controller screen: Click ‘Allow Doors to Join this Controller’
All Door Controls that don’t have an address start to beep out the next
available address. The Keys will also illuminate to indicate the address.
e.g. Keys 1 & 5 will be ON for address number 15.
2 Hit any key on the ‘beeping’ Door Control to assign this address.
Present a Card on the ‘beeping’ Proximity unit to assign this address.
When a Door Control is assigned an address, all unassigned Door
Controls will start to beep the next available address.
3 When all doors are assigned: Click ‘Secure Network’
Assigning a Door Address on a Wired 485 Network
Step Description
1 Right Click on the Controller Icon & select ‘Manually Assign Addresses’
Follow Step 2 above to complete the process.
Enrolling Door Controls
14
Enrolling Door Controls
Adding Door Controls
Step Description
1 Click the Doors Icon on the left hand toolbar
2 Click ‘Add New Door’
3 The Door is added to the Controller.
4
Configure the required Door settings : Door Timers, Alarm Options,
Door Options, Timed Actions, Inputs & Outputs.
5 Click ‘Save’ to transmit the changes to the GSD Controller.
1
2
5
