GCC Technologies LaserPro StellarMark IFII Series, Руководство пользователя

Страница: 100 / 111

StellarMark IFII-Series User Manual
Rev.5.0
96
`
⚫
The Input and Output pins on the Control Unit are corresponding with
the I and O signals on the G-Mark marking software property table as
below:
(1) Input pins
Ready
(Out)
OUTPUT
➢
When G-Mark Librarysoftware is opened, it will send
out a signal out.
➢ When the “Marking” window jumps out and laser
Marker is ready to fire; it will send a signal out.
➢
When laser marker is firing, it will send a signal out.
I1~I8 INPUT There are 8 input signals (External device
→
Stellar
Mark) available to communicate with external devices
STOP INPUT When Stop- pin and Ground pin are at short status, laser
marker will stop working.
START INPUT When Start- pin and Ground pin are at short status, laser
marker will trigger the fire.
E-Stop INPUT This is terminal used to connect external emergency
stop.
GND POWER Ground
24V POWER
(Output)
A 24V is available
Not Available
The pin 9 to pin 16 input
status are not available
to communicate with
laser marker.