GCC Technologies Elite 21DN+, Руководство по началу работы

Страница: 46 / 80

44
5c. If AppleTalk is selected, make sure the
printer is turned on and connected to the
network. A list of available AppleTalk
printers will appear. Click on the name of
your printer from the list. Click “Add.”
Note : AppleTalk is disabled by default
within OS X. Make sure that “Make
AppleTalk Active” is selected in your
Network Settings (under System
Preferences) before attempting to access
AppleTalk devices on the network.
6. Once the printer has been added, you will
be returned to the Printer List window,
where the printer will now appear as an
option.
Highlight the printer name and click the
“Configure” icon to configure printer
options.
You are now ready to print to the Elite 21
printer.
Note: Using the Classic Environment within OS X
The Elite 21 Software Installer will locate and automatically install the necessary software for your printer
into the Classic (OS 9.x) environment within OS X. No additional software installation is necessary.
To set up your printer for use within Classic, you will need to create a Desktop Printer for the Elite 21
printer. Follow the steps beginning on Page 27 of this guide in order to set up a desktop printer icon for
the printer in the Classic environment.
Note: Configuring Printer Options within older versions of OS X
OS X versions previous to OS X 10.2 (Jaguar) do not allow for or require manual configuration of printer
options. When the printer is installed and selected in Print Center, the OS takes configuration information
from the PPD file and polls the printer to determine which options are present. These options (such as
additional trays, duplexing capabilities) will then automatically be available for selection within the Print dialog
box.