Vhandy Technology
GCAN-208 user manual
recognized, and the recognized baud rate can be enabled when the module is powered
on again. If the red light is always on after the strobe, it means that the recognition is
not successful. The physical layer needs to be checked at this time.
Note: After the device automatically recognizes the baud rate, the DIP switch will
become invalid.
3.1.3 View the baud rate of the current device
When you need to know the value of the baud rate used by the current device, first
open the device shell (unscrew the black screws on both sides) and then connect the
USB port of the device to the computer with a USB cable. The USB port is a USB-
MINI port. As shown in Figure 3.3.
Figure 3.3 Schematic diagram of USB port
At this time, a removable disk will appear on the computer, as shown in Figure 3.4
Figure 3.4 Schematic diagram of removable disk
Open the disk, a notepad file will appear in it, and the value of the current CAN
channel baud rate will be displayed in the file. As shown in Figure 3.5: