GC5 SFAR-1M-2DI2DO, Руководство пользователя

Страница: 8 / 13

SFAR-1M-4DI User Manual
Version 3.0 www.gc5.pl Page 8 / 13
3.4.2. Configuration registers
Modbus Dec Hex
Name Values
Address
40003 2 0x02 Baud rate
0 – 2400
1 – 4800
2 – 9600
3 – 19200
4 – 38400
5 – 57600
6 – 115200
other – value * 10
40005 4 0x04 Parity
0 – none
1 – odd
2 – even
3 – always 1
4 – always 0
40004 3 0x03 Stop Bits LSB
1 – one stop bit
2 – two stop bits
40004 3 0x03 Data Bits MSB
7 – 7 data bits
8 – 8 data bits
40006 5 0x05 Response delay Time in ms
40007 6 0x06 Modbus Mode
0 – RTU
1 – ASCII
Table 4 - Configuration registers
3.4.3. Watchdog information
This 16-bits register specifies the time in milliseconds to watchdog reset. If module does
not receive any valid message within that time, all Digital and Analog Outputs will be set to
the default state.
This feature is useful if there is an interruption in data transmission and for security
reasons. Output states must be set to the appropriate state in order to reassure the safety
of persons or property.
The default value is 0 milliseconds which means the watchdog function is disabled.