gc 10 ATM, Инструкция по эксплуатации

Страница: 6 / 87

6
1. PULL out the crown to position 2.
2. TURN crown clockwise to correct day or date. The day hand will advance one day when 4:30 in the
morning is reached.
3. PUSH back crown to position 1.
NOTE: to “quick change” the date set the crown at position 1 then press pusher A.
CHRONOGRAPH
12,6,9 THREE-EYE CHRONO 1/10 SEC
NOTE:
Crown position ‘1’, ‘2’ & ‘3’
Pushers ‘A’ (top) and ‘B’ (bottom)
Left eye “30 minutes elapsed”
Right eye “1/10 seconds elapsed”
Center eye “seconds elapsed”
THIS CHRONOGRAPH WATCH HAS 3 FUNCTIONS:
Time, Calendar, Stopwatch
TIME:
To set the time:
1. PULL crown to position 3.
2. TURN crown either way to correct time (same for Day when this function is available).
3. PUSH back crown to position 1.
CALENDAR:
1. PULL crown to position 2.
2. TURN crown clockwise to correct calendar.
3. PUSH back crown to position 1.
STOPWATCH:
The stopwatch is capable of measuring:
1. One minute elapsed up to 30 minutes.
2. Chronograph hand 1/10 or 1/5 second.
Before using the stopwatch, reset the stopwatch hands to the ‘60’ position by pressing pusher ‘B’. If stopwatch
hands move improperly, reset the hands as follows:
TO RESET STOPWATCH HANDS:
BIG CHRONOGRAPH HAND IN THE CENTER
1. PULL crown to position 2
2. PRESS pusher B until the chronograph hand is reset to ‘60’
3. RESET crown to position 1
COUNTER HAND 1/10 AT 12 O’CLOCK:
1. PULL crown to position 2
2. PRESS pusher A until the top eye hand is reset to ‘0’
3. RESET crown to position 1
COUNTER MINUTE HAND AT 9 O’CLOCK:
1. PULL crown to position 3
2. PRESS pusher A until the left eye hand is reset to ‘30’
3. RESET crown to position 1
STANDARD STOPWATCH MEASUREMENT:
1. PRESS pusher A to start timing
2. PRESS pusher A to stop timing
3. PRESS pusher B to reset