gc 10 ATM, Инструкция по эксплуатации

Страница: 10 / 87

10
CORRECTIVE MODE FOR STOPWATCH CHRONO HANDS
On all Chrono movements, if the largest hands do not reset perfectly back
to the 12 o’clock or zero position:
1. PULL crown to position 3.
2. If center stopwatch second hand or Chrono hands do not reset to the 12 o’clock or zero position, press
pusher A and B simultaneously for at least 2 seconds.
3. The center stopwatch second hand will rotate by 360 degrees to activate corrective mode.
4. If center stopwatch second hand or Chrono hands are not located at
‘12’ or ‘0’ position, either press pusher A continuously or repeatedly until the center stop second hand moves
by each interval and returns to ‘12’ and ‘0’ position. Press pusher B once to activate corrective move of
next minute Chrono hand, hour Chrono hand, or 1/10 second Chrono hand. Press pusher A continuously or
repeatedly until the minute Chrono hand and hour Chrono hand or
1/10 second Chrono hand moves by each interval and returns to
‘12’ and ‘0’ position.
5. PUSH back crown to position 1 to activate the adjustment.
AUTOMATIC
TIME CORRECTION
To set time:
1. UNSCREW and PULL out crown to position 3. The second hand will stop.
2. To adjust to the second, place second hand at 12H.
3. TURN crown to set the correct hour and minute.
4. PUSH back crown to position 1.
DATE CORRECTION
To set date:
1. UNSCREW and PULL out crown to position 2.
2. TURN crown clockwise to correct the date.
3. PUSH back crown to position 1 and screw tightly to the case.
WINDING
The Gc Automatic is equipped with a high-quality mechanism with automatic winding. With the slightest movement
of your wrist, a silent rotor conveys power to the spring. When it is fully wound, the minimum power reserve is
38 hours. If the watch is not used during a certain time, we recommend winding your Gc Automatic manually by
means of winding the crown in position 1.
AUTOMATIC / CHRONOGRAPH
TECHNICAL SPECIFICATIONS
The Gc Automatic Chronograph features:
-A Valjoux 7750 Chronograph movement with 28,800 vibrations per hour and 25 jewels
-A 42-hour power reserve indicator
Time Correction
Unscrew and pull the crown to position 3. The second hand will stop.
To adjust it to the second, place the second hand at 12. Set the hands to the correct hour and minute.
Date Correction
Unscrew and pull the crown to position 2. Turn it clockwise until the displayed date is correct. Then, push back
the crown to position 1 and screw down tightly to the case.