GC Water Easy 360 Скачать руководство пользователя страница 3

PAGE 3

OPERATION OVERVIEW 

Unit is an automatic device that requires no user interaction for daily operation (provided city pressure and power 

parameters are met). An emergency bypass valve is provided on the faceplate for use by the owner in the event the Easy 

Series System water pressure changes and city water is required to continue temporary operation to the points of use. 

OPERATING PARAMETERS:

O

pen flow rate

 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(28.5 LPM) 5 GPM

Service flow rate, filter

.  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 18.9 LPM) 3 GPM 

Output pressure     .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .(3 bar) 45 PSI
FEED WATER and POWER REQUIREMENTS:

Pressure     .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .(2.7-3.4bar) 40-90 PSI

Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (10°-26°C) 50°-80°F

Max TDS     .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   . 1,000 mg / L

Max chlorine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.0 mg / L

Electrical    .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .110, 60 HZ, 2 amps

Delivery Pump running - Sound emission . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . <50dB max
SIZE/WEIGHT: 

Height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  (749.3mm) 29.5”

Width . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(609.6mm) 24”

Depth    .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .(457.2mm) 18”

Ship (dry) weight    .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .(32 kg) 70 lbs

Wet weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(97 kg) 214 lbs
PERFORMANCE DATA:

Avg percent reduction of TDS     .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   91.8%

Avg TDS influent challenge concentration

    .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   . 750 ± 4mg/L

Max permissible product water concentration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 187 mg/L

Avg product water concentration    .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   . 62 mg/L

TDS range (customer specific) 

 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50-200 ppm*

TDS control range means the range within which the water is to be formulated or the amount of TDS retained to meet 

a customer’s specific requirement.
*Certified by manufacturer testing at the factory and at the user’s site as part of System installation start up procedure.

Daily production rate @ 70 psi/77°F 

(not tested by NSF) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  500 GPD

Daily production rate @ 50 psi/75°F 

(as tested by NSF)    .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   328 GPD

Highest efficiency rating in the industry.   Efficiency rating means the 

percentage

 of the influent water to the System 

that is available to the user as reverse osmosis treated water coming out of the System under normal operating 

conditions (approximate typical daily usage.)  Testing was performed under standard laboratory conditions, actual 

performance may vary.
WARNING:

Do not use where water is microbiologically unsafe or of unknown quality. Replacement components are to be man-

ufactured or approved by Global Customized Water to maintain efficiencies. System is to be serviced at prescribed 

time/usage intervals according to this document, to maintain warranty. 

CERTIFICATIONS:

Fitting, filter and housing components are NSF And/or WQA certified.

UNIT SPECS

Содержание Easy 360














Отзывы: