- 31 -
BIOS Setup
English
Integrated Peripherals
Figure 4: Integrated Peripherals
CMOS Setup Utility -Copy right (C) 1984-2002 Aw ard Softw are
Integrated Peripherals
IDE1 Conductor Cable
[Auto]
Item Help
IDE2 Conductor Cable
[Auto]
Menu Lev el
u
On-Chip Primary PCI IDE
[Enabled]
[Auto]
On-Chip Secondary PCI IDE
[Enabled]
Auto-detect IDE
AC97 Audio
[Enabled]
cable ty pe
AC97 Modem
[Enabled]
Sy stem Share Memory Size
[32MB]
[ATA66/100]
USB Controller
[Enabled]
Set Conductor cable
USB Legacy Support
[Disabled]
to ATA66/100(80-pins)
On Board LAN Function
[Enabled]
Onboard Serial Port A
[3F8/IRQ4]
[ATA33]
Onboard Serial Port B
[2F8/IRQ3]
Set Conductor cable
Serial Port B Mode
[Normal]
to ATA33(40-pins)
Onboard Parallel Port
[378/IRQ7]
Parallel Port Mode
[ECP]
x EPP Mode Select
EPP1.7
ECP Mode Use DMA
[3]
Game Port Address
[201]
Midi Port Address
[330]
Midi Port IRQ
[10]
higf
: Mov e Enter:Select +/-/PU/PD:Value F10:Sav e ESC:Ex it F1:General Help
F5:Prev ious Values F6:Fail-Safe Defaults F7:Optimized Defaults
C
IDE1 Conductor Cable
8
Auto
Will be automatically detected by BIOS. (Default Value)
8
ATA66/100
Set IDE1 Conductor Cable to ATA66/100 (Please make sure y our IDE dev ice
and cable is compatible w ith ATA66/100).
8
ATA33
Set IDE1 Conductor Cable to ATA33 (Please make sure your IDE dev ice and
cable is compatible w ith ATA33).
