- 17 -
Hardw are Installation Process
English
IDE1
IDE2
E) IDE1/ IDE2 [IDE1 / IDE2 Connector(Primary/Secondary)]
Ø
Important Notice:
Please connect first harddisk to IDE1
and connect CDROM to IDE2.
N) F_AUDIO (Front Audio Connector)
Ø
If you want to use "Front Audio" connector, you must remove 5-6, 9-10 Jumper. In order to utilize the
front audio header, your chassis must have front audio connector. Also please make sure the pin
assigment on the cable is the same as the pin assigment on the MB header. To find out if the chassis
you are buying support front audio connector, please contact your dealer.
1
1
GND
Rear Audio (R)
Rear Audio (L)
2
10
POWER
Front Audio (L)
1
Reserved
Front Audio (R)
9
MIC
REF
O) CD_IN (CD Audio Line In)
1
CD-L
CD-R
GND
P) AUX_IN ( AUX In Connector)
AUX-R
AUX-L
GND
1
