FITTING INSTRUCTIONS
TO BE FITTED BY A QUALIFIED TECHNICIAN
PADDOCK STAND BOBBINS
All Models
PADDOCK STAND / BOBBIN SET
PART NO. BA12-6-RSV4-GBR-SET
(1) Assemble M6 x 40mm Bolt & M6 Washer
thru moulded bobbin.
(2) Tighten bolts to swing arm boss , 8 N/m.
Do not overtighten.
Fitting Instructions
To be fitted by a qualified Technician
1 off M6 x 40 Bolts
1 off Moulded Paddock stand/bobbin
BA12-6-GBR
1 off M6 Washer
(1) Assemble M6 x 40mm Bolt & M6 Washer
thru moulded bobbin.
(2) Tighten bolts to swing arm boss , 8 N/m.
Do not overtighten.
Fitting Instructions
To be fitted by a qualified Technician
1 off M6 x 40 Bolts
1 off Moulded Paddock stand/bobbin
BA12-6-GBR
1 off M6 Washer
(1) Assemble M6 x 40mm Bolt & M6 Washer
thru moulded bobbin.
(2) Tighten bolts to swing arm boss , 8 N/m.
Do not overtighten.
Fitting Instructions
To be fitted by a qualified Technician
1 off M6 x 40 Bolts
1 off Moulded Paddock stand/bobbin
BA12-6-GBR
1 off M6 Washer
(1) Assemble M6 x 40mm Bolt & M6 Washer
thru moulded bobbin.
(2) Tighten bolts to swing arm boss , 8 N/m.
Do not overtighten.
Fitting Instructions
To be fitted by a qualified Technician
1 off M6 x 40 Bolts
1 off Moulded Paddock stand/bobbin
BA12-6-GBR
1 off M6 Washer
(1) Assemble M6 x 40mm Bolt & M6 Washer
thru moulded bobbin.
(2) Tighten bolts to swing arm boss , 8 N/m.
Do not overtighten.
Fitting Instructions
To be fitted by a qualified Technician
1 off M6 x 40 Bolts
1 off Moulded Paddock stand/bobbin
BA12-6-GBR
1 off M6 Washer
(1) Assemble M6 x 40mm Bolt & M6 Washer
thru moulded bobbin.
(2) Tighten bolts to swing arm boss , 8 N/m.
Do not overtighten.
Fitting Instructions
To be fitted by a qualified Technician
1 off M6 x 40 Bolts
1 off Moulded Paddock stand/bobbin
BA12-6-GBR
1 off M6 Washer
(1) Assemble M6 x 40mm Bolt & M6 Washer
thru moulded bobbin.
(2) Tighten bolts to swing arm boss , 8 N/m.
Do not overtighten.
Fitting Instructions
To be fitted by a qualified Technician
1 off M6 x 40 Bolts
1 off Moulded Paddock stand/bobbin
BA12-6-GBR
1 off M6 Washer
(1) Assemble M6 x 40mm Bolt & M6 Washer
thru moulded bobbin.
(2) Tighten bolts to swing arm boss , 8 N/m.
Do not overtighten.
Fitting Instructions
To be fitted by a qualified Technician
1 off M6 x 40 Bolts
1 off Moulded Paddock stand/bobbin
BA12-6-GBR
1 off M6 Washer
1 x Moulded Paddock Stand / Bobbin
1 x M6 x 40/50 Bolts
1 x M6 Washer
1
Assemble M6 x 40mm Bolt & M6 Washer for the
right hand side through the moulded bobbin.
2
Assemble M6 x 50mm Bolt & M6 washer for the
left hand side through the moulded bobbin.
This is to allow for the refitment of the original lower chainguard.
3
Tighten bolts to swing arm boss, 8 N/m.
www.GBRacing.eu
DO NOT use these products unless you agree to our Terms & Conditions, as shown on our paperwork and website. If you do not agree, please return the product(s) to your dealer for a refund.
