Gbord RM-401X-A0, Руководство пользователя

Страница: 14 / 40

3.2 Jumper Settings
The illustration shows how jumpers are setup. When the jumper cap is placed on pins, the jumper is “Short”. If no jumper
cap is placed on pins, the jumper is “Open”. The illustration shows a 3 - pin jumper whose pin1 and pin2 are “Short” when
jumper cap is placed on these 2 pins.
Clear CMOS Jumper
(3 pin CLRMOS1)
CLRCMOS1 allows you to clear the data in CMOS. To clear and reset the system parameters to default setup, please
turn off the computer and unplug the power cord from the power supply. After waiting for 15 seconds, use a jumper cap
to short pin2 and pin3 on CLRCMOS1 for 5 seconds. However, please do not clear the CMOS right after you update the
BIOS. If you need to clear the CMOS when you just finish updating the BIOS, you must boot up the system first, and
then shut it down before you do the clear-CMOS action. Please be noted that the password, date, time, user default
profile and MAC address will be cleared only if the CMOS battery is removed.
ATX/AT Mode Selection
(3 pin PWR_JP1)
Setting Description
1-2 AT Mode
2-3 ATX Mode