Chapter 4: Hardware Setup
4.1 Preparing the Hardware Installation
To access some components and perform certain service procedures, you must perform the following procedures first.
WARNING:
To reduce the risk of personal injury, electric shock, or damage to the equipment, remove the
power cord to remove power from the server. The power switch button does not completely shut off
system power. Portions of the power supply and some internal circuitry remain active until power is
removed.
1.
Unpowered the EBC-310L and remove the power cord.
2.
Turn the device upside down.
3.
Unscrew the 4 rubber feet from the bottom cover.
4.
Open the cover.