Figure 2
1. Weather tendency indicator
2. Sensor Low power indicator
3. Dew point and temperature display
4.Outdoor temperature display
5.Outdoor Temperature u
nits (°F or °C)
6.Channel indicator
7.Scroll mode indicator
8. Remote Symbol Signalsuche
9. Outdoor Humidity units of measure (%)
10. Outdoor humidity display
11.Indoor Temperature u
nits (°F or °C)
12. Indoor Humidity units of measure (%)
13. Indoor humidity display
14. Indoor temperature display
15.week or second
16.Clear for 24h icon
17.Year or date
18.SNOOZE Flashing Time sleep
19. Time
20. Pressure (REL and ABS) display
21.Pressure measure units
2.2.2 Indoor Machine Initial Set Up
NOTE:
The weather station can be powered by 3*
AAA batteries(not inclueded) or a USB
cable(included).
1. Remove the battery cover on the back of the unit as shown in Figure 3.
2. Insert three AAA batteries in the back of the unit. The machine will beep once and all of the
LCD segments will light up for a few seconds to verify all segments are operating properly. The
screen will cycle through a spectrum of colors.
