7 -
(DIP SWITCH - DIP1)
FUNCTIONS PROGRAMMING
DIP 1
ON
ON
ON
OFF
OFF
OFF
TERMINALS 6-7
OPERATION
The outputs 6-7 of the terminal board are used to manage a COURTESY LIGHT,
stays active for 2 minutes after the movement of the motor.
The outputs 6-7 of the terminal board are used to manage a FLASHING LIGHT.
Slow flashing in opening and fast in closing, off in pause and at rest.
DIP 2
DIP 3
AUTOMATIC
RECLOSING
TIMES
LEARNING
Automatic closing enabled.
Function enabled only if the manoeuvre happens after a START command.
Automatic closing disabled.
Standard operation.
Time learning enabled.
DIP 4
STEP - STEP
WITH STOP
OFF
Position
Value
Type
5 A
F1
FAST
Description
Board protection on 230 Vac power supply input
6 - PROTECTION FUSES
DIP
Function
Description
Status
The settings are memorized during the pause phase (door closed).
The DEFAULT settings are highlighted in grey.
IT
IT
UK
SR302
15
UK
SR302
14
DIP
Function
Description
Status
ON
DIP 4
DEAD MAN
DIP 5
SOUND
FUNCTION
OFF
ON
ON
OFF
DIP 6
IN EDGE
Acoustic signal disabled
Acoustic signal enabled during the motion.
Slow intermittent sound in opening, off in pause, fast intermittent sound in closing.
WARNING:
Ÿ
In DEAD MAN operation mode only DOMINO, MAKO, GIOTTO
transmitters work
Ÿ
In DEAD MAN operation mode the automatic closing is disabled
DIP2 = OFF DEAD MAN ENABLED ONLY IN CLOSING
Operation witn ONE BUTTON:
Reply to START command:
• Shutter closed
OPENS
→
• During opening
STOPS
→
• Shutter open
CLOSES as long as it is enabled, then STOPS
→
• After a Stop
movement opposed to the one before STOP, if in
→
closing as long as it is enabled, then STOPS
Operation witn TWO BUTTONS:
Reply to OPEN command:
• Shutter closed
OPENS
→
• During opening
STOPS
→
• Shutter open
IRRELEVANT
→
• After a Stop
OPENS
→
Reply to CLOSE command:
• Closes as long as the CLOSE command is enabled, then STOPS
DIP2 = ON DEAD MAN ENABLED IN OPENING AND CLOSING
Operation witn ONE BUTTON:
Reply to START command:
• Shutter closed
OPENS as long as it is enabled, then STOPS
→
• Shutter open
CLOSES as long as it is enabled, then STOPS
→
• After a Stop
movement opposed to the one before STOPS
→
as long as it is enabled, then STOPS
Operation with TWO BUTTONS:
Reply to OPEN command:
• Opens only if it is enabled, then STOPS
Reply to CLOSE command:
• Closes only if it is enabled, then STOPS
Input used as Edge (N.C.), when the contact opens in closing, if «DEAD MAN IN
OPENING AND CLOSING» function is disabled, the control unit inverts the motion
up to the complete opening. The contact is irrelevant during opening.
Input used as STOP (N.C.), totally stops the motion avoiding any action.
Operation of transmitters with two buttons (DOMINO, MAKO, GIOTTO series):
Operation of transmitters with one button (DOMINO, MAKO, GIOTTO series):
Repy to START command:
• Shutter closed OPENS
→
• During opening STOPS
→
• Shutter open CLOSES
→
• During closing STOPS
→
• After a Stop movement opposed to the one before STOP
→
NOTE
: If the automatic closing is enabled, after the end of the opening and passed
the pause time, the control unit automatically closes. Function enabled only with
operation with one button.
Repy to CLOSE command:
• Shutter closed IRRELEVANT
→
• During opening STOPS
→
• Shutter open CLOSES
→
• During closing STOPS
→
• After a Stop CLOSES
→
Repy to OPEN command:
• Shutter closed OPENS
→
• During opening STOPS
→
• Shutter open IRRELEVANT
→
• During closing STOPS
→
• After a Stop OPENS
→
Operation with transmitters (EWSETX... series):
Repy to OPEN command:
• Shutter closed OPENS
→
• During opening IRRELEVANT
→
• Shutter open IRRELEVANT
→
Repy to CLOSE command:
Shutter closed IRRELEVANT
→
During opening IRRELEVANT
→
Shutter open CLOSES
→
Repy to STOP command:
Stops the motion both in opening and closing. Irrelevant with shutter completely
open or closed
