Feed the stack of oiled paper through the shredder, the
oil that has been absorbed by the paper will lubricate
the cutting cylinders. If required feed a few sheets of
paper into the shredder to absorb residual oil from the
cutting cylinders.
Stack some A4 paper (2-3 sheets thick) on top of the
paper that oil was applied.
Only use GBC Oil* (1760049) to lubricate. Apply
shredder oil to one side of paper (2-3 sheets thick)
in a wide zigzag pattern across the page to ensure
sufficient coverage.
(Do not over saturate
the paper with oil.)
* ACCO Brands accepts no liability for product performance or safety when other types or brands of lubricants are used
on any part(s) of this machine.
To maintain maximum shredding performance, we recommend to lubricate the shredder after the bin has been emptied three times
(and for ongoing three bin cycle thereafter) or at least once a month. The more often the shredder is used, the more frequently you
should oil your paper shredder.
Lubrication of the Shredder
Option 2: Lubricate the shredder using the shredder oil
Only use Rexel Oil Sheets* (2101948) to
lubricate. Simply feed one sheet of the oil sheet
through the shredder.
Option 1: Lubricate the shredder using the oil sheet
............................................................................
...........................................................................
...........................................................................
............................................................................
.........................................................................
.........................................................................
.............................................................................
..............................................................................
